Privacy Fence Installation in Cedar Park

A privacy fence is the single biggest backyard upgrade most Cedar Park homeowners make, and the gap between a fence that holds up for 20 years and one that fails in 5 has almost nothing to do with the price tag. It comes down to post depth, picket grade, fastener choice, and whether the contractor knows what passes HOA review on the first submission. We’ve built privacy fences in Twin Creeks, Avery Ranch, Cypress Creek, Brushy Creek, and most major neighborhoods across Williamson County. Cedar Park Fence & Deck is a family-run, veteran-owned fence and deck contractor that has installed privacy fencing throughout Central Texas since 2013. We’re fully insured, every quote is written, and every project starts with a property walk so you know exactly what you’re getting before any work begins.

Call (512) 566-7520 for a free estimate. We’ll walk the lot, measure the run, talk through cedar versus board-on-board versus 8-foot designs, and leave a written quote the same day.

  • This field is for validation purposes and should be left unchanged.

What Privacy Fence Installation Includes

Privacy fence installation covers material selection, post-setting in concrete, picket installation, gate hardware, and full HOA approval coordination from start to finish. A 6-foot cedar privacy fence in Cedar Park takes three to four days from demolition to final build.

We most often install three privacy fence styles in Cedar Park. Side-by-side cedar with a top cap and trim is the standard for most HOA neighborhoods. Board-on-board is the upgrade when full neighbor-side privacy matters or wind exposure is high. And 8-foot fences are what we build for Bee Cave and Lakeway homes that back to the greenbelt or open Hill Country. Each style has a different post depth, picket spacing, and stain spec.

Behind the visible work, we set every post in concrete to a minimum depth of 30 inches in Cedar Park clay soil. Stainless steel ring-shank nails on cedar pickets. Galvanized hardware on every gate. We don’t subcontract the build. Every fence we install is handled by our own crew, the same people we send to the next Liberty Hill job tomorrow.

Wood fence with steel posts for enhanced strength and stability
Fence with corrugated steel in the middle for a modern industrial look

Cedar, Composite, and Vinyl: Choosing Privacy Fence Material

Cedar is the dominant choice in Williamson County. It’s naturally rot-resistant, holds stain well, and ages to a warm gray when left untreated. We source rough-sawn western red cedar from the same yard for every job, which means consistent grain, fewer knots, and a predictable lifespan. A cedar privacy fence in Cedar Park typically lasts 20 to 25 years with one stain refresh every two to three years.

Composite privacy fencing is gaining ground in newer Manor and Round Rock subdivisions where homeowners want the cedar look without the maintenance schedule. Composite costs more upfront but eliminates staining entirely, and the panels resist warping in Texas heat better than budget cedar does.

Vinyl privacy fencing rounds out the lineup. It’s the lowest-maintenance option, comes in white or tan, and works particularly well for backyards that need a clean, modern look against pool decks or stucco homes. We install vinyl from name-brand manufacturers because the cheap stuff yellows in two summers under the Texas sun.

two men installing wooden deck

Our 5-Step Privacy Fence Installation Process

Every privacy fence we install follows the same five steps. First, we walk the property line with you, mark gate locations, confirm HOA-approved materials and color, and pull together the spec sheet your HOA needs. Second, we coordinate with our permit partners if a permit applies. For residential fencing under 7 feet in most Cedar Park neighborhoods, no permit is required, but we’ll always confirm.

Third, we remove and dispose of any existing fencing, dig the post holes to a depth of 30 inches, and set the posts in concrete with a slight slope away for drainage. Fourth, we install the rails, pickets, and trim cap. Fifth, we hang the gates with self-closing hinges and weatherproof latches, then either stain on day one for cedar or finish the cleanup for composite and vinyl.

Total time on a 150-foot residential privacy fence runs three to four days. Larger lots or fences with significant grade changes can stretch to a week.

person drilling deck boards

Cost Factors for Privacy Fence Installation in Cedar Park

The cost of installing a privacy fence depends on five factors. Linear footage is the biggest. Material choice is second. Cedar runs less than composite, composite less than premium vinyl. Height matters next: a 6-foot fence is the standard, and an 8-foot fence requires deeper posts. Gate count and style affect pricing, too. Finally, terrain matters. Hillside lots in Lakeway and Bee Cave need stepped or racked panels, which take longer than flat-lot installations in Round Rock or Leander.

We price every project as a single line item, not per linear foot. Foot-pricing hides the real variables and ends in surprise charges when the crew finds rock, slope, or removal work that wasn’t quoted. Every estimate breaks down materials, labor, gate hardware, and timeline before we put a shovel in the ground.

Request a free quote, and we’ll come out within the week.

HOA-Compliant Privacy Fencing Across Cedar Park Communities

Most of our privacy fence work runs through an HOA. Twin Creeks, Avery Ranch, Cypress Creek, Ranch at Brushy Creek, and most of the Buttercup Creek and Anderson Mill subdivisions all have specific fence requirements covering height, picket spacing, top cap design, stain color, and finished side orientation. We know what each HOA approves because we’ve worked in all of them.

For homes outside HOA jurisdiction, you have full control. We’ll talk through what works visually with your house style, what holds up best for your lot’s exposure, and what your neighbors already have so it reads as one coordinated property line.

Areas We Serve for Privacy Fence Installation

Cedar Park is the home base. We install privacy fences across Williamson County and the surrounding suburbs.

That includes Manor and Buda, where flat clay-heavy lots make post-setting straightforward, and Bee Cave and Lakeway, where Hill Country slope and greenbelt exposure drive different design choices.

Frequently Asked Questions

How long does a privacy fence last in Cedar Park?

A properly built cedar privacy fence in Cedar Park lasts 20 to 25 years with regular staining every two to three years. Composite runs 25 to 30 years with no staining. Vinyl typically lasts 25 years before any meaningful degradation. The biggest predictor is post depth and concrete footing, not the visible material. A fence with shallow posts will fail at year 8 regardless of what’s above ground.

Do I need a permit to install a privacy fence in Cedar Park?

For most residential privacy fences under 7 feet, no permit is required in Cedar Park. Fences over 7 feet, fences within easements, and fences in some HOA neighborhoods require either a permit or HOA approval. We confirm permit and HOA requirements during the walkthrough and handle the documentation either ourselves or through our permit partners.

What's the difference between board-on-board and side-by-side privacy fences?

Side-by-side has pickets butted against each other with no overlap. It’s the standard build, looks clean, and is HOA-approved everywhere. Board-on-board overlaps each picket with the next, providing true full-coverage privacy from both sides and adding wind resistance. Board-on-board uses about 30% more material and, accordingly, costs more.

Can you install a privacy fence on a sloped lot?

Yes. Sloped lots get either stepped panels (each section drops to the next, creating a stair effect along the top cap) or racked panels (the panels follow the grade continuously). Stepped is more common in Lakeway and Bee Cave because it reads as intentional design. Racking works better when the slope is gentle.

How tall should a privacy fence be?

Six feet is the standard for residential privacy in Williamson County, and it’s what most HOAs require. Eight-foot fences are common for backyards that back onto greenbelts, busy roads, or commercial property. Anything taller usually triggers a permit requirement and HOA review.

Do you handle privacy fence repair, too, or just new installation?

Both. Our fence repair team handles privacy fence repair across Williamson County, including leaning posts, rotted pickets, sagging gates, and storm damage. If the structure is too far gone for repair, we’ll quote replacement and walk you through the trade-offs honestly.

How do I prepare my yard for privacy fence installation?

Mark sprinkler heads, low-voltage lighting, and any underground irrigation lines. We’ll call 811 to mark utility lines before we dig. Move yard furniture, planters, and pet enclosures away from the fence line. If you have dogs, plan for them to stay inside or at a sitter for the days we’re on site. We handle everything else.

Can you stain the fence after installing it?

Yes. New cedar fences should be stained four to six months after installation, once the wood dries to about 15% moisture content. Our fence staining service handles the full prep, application, and seal. Many privacy fence quotes include a follow-up staining visit at the four-month mark.

Call (512) 566-7520 or check our blog for fence guides and seasonal advice. We’ll come out within the week, walk the property, and leave with a written quote.

GET A FREE QUOTE NOW!

Do you have a design in mind? Send us a message. Let us know your expected result and let us deliver quickly. We also offer a free quote for your fence and deck needs.

Call Now Button